How to choose a suitable air compressor hose?

Nowadays, you can see a huge variety of hoses widely available in the market. It can be difficult in selecting among these varieties without knowing the essential features.

When you choose an air compressor hose, you must check the stability of the air pressure, consistent power output, and a tight seal. While choosing air compressor hose fittings, you must scrutinize the fittings and the metals used to manufacture them.

Few websites take pride in boasting years of experience in this industry. They have been delivering easy-to-use, affordable, and premium quality air hose compressor fittings for many years.

Before spending money and get defrauded by any pneumatic pieces of equipment, you must see the samples from the manufacturer and the hose fittings provider.

 What is an air compressor? How does it work? 

An air compressor device converts any power using diesel, an electric motor, or gasoline engine into the potential energy stored as compressed air. An air compressor forces more air into the storage tank that leads to increase the pressure. 

When this tank pressure reaches the upper limit, the compressor desists. Then, the compressed air is preserved in the tank until it is instigated to work.

On the other hand, when the tank pressure swipes down to its lower limit, the air compressor again turns on and puts pressure on the tank. The users must keep in mind that an air compressor is not similar to a water pump. The compressor works for any air, gas or liquid; whereas a water pump specifically works on liquid.

Where do the manufacturers pay attention while manufacturing hose fittings?

Similar to the air compressor, hose pipe fittings are manufactured and supplied to many customers across the world at affordable prices. Fittings need to be dimensionally accurate and must be procured by trustworthy vendors.

Besides the dimensional accuracy, the manufactures also think for longer operational life, ease of installation, and high corrosion resistance. Air compressor hose fittings are also provided in multiple specifications according to the compressor and the need of the clients.


Instructions for using air compressor lose fittings: Warnings & Precautions 

One must take precautions while using air compressor hose fittings. Some warnings are inscribed in the body of the compressor and the hose. Added to that, the hose fittings suppliers also warn the customers about other precautions at the time of purchase. Catch a quick glimpse to the instructions listed below-

Ø  Stay aware of not crimping the hose-

Crimping the hose leads to damage and burst. So, never use a kinked hose. 

Ø  Do not stretch or twist the hose-

If the hoses are stretched and twisted under pressure, the stress concentration arises. The hose may burst or the fittings may blow-off.

Ø  Protect the hose from abrasion-

The users must protect the hose from abrasion as it causes stress concentration. The abrasion creates rust and accelerates the damage. 

Ø  Do not touch the hose where it is broken-

When a hose is cracked or broken, the fluid flows within the hose tend to leak out. Avoid touching the fluid or the cracked portion of the hose because the leaked fluid can burn your skin. 

Ø  Do not rework with a repaired hose assembly-

The repaired hose is not capable of performing the same way a new hose works. Besides that, the physical characteristics of the repaired hose also differ from the new hoses. So, if anyone works with the repaired hose, it bursts out.

It is only in the case of hose; the neoprene rubber sheet supplier also forbids the buyers to use repaired neoprene rubber sheets. 

Ø  System working pressure must not exceed the rated working pressure-

You have to restrict the system pressure and look after that it does not exceed the rated working pressure of the hose. 

What should we avoid while using the air compressor hose?

  • Avoid applying external pressure and vacuum pressure to the hose because it leads to serious damage and hose burst.
  • Excessive internal and external pressure can peel-off the inner tube or crimp it. This results in reducing the service life of the hose.
  • Do not sink hose assemblies in water or submerge in high humid. One must keep the hose fittings away from water to protect the outer layer of the hose from peeling off.
  • Hose fittings are made of with metal, and many hoses are from rubber. So avoid applying electrical current to the hose fittings. The fluid runs through the hose can be flammable. It also causes hose failure. Not only that, the users may get an electric shock.
  • Excessive vibration is also a big no-no for the hose assembly. Vibration causes fatigue, which results in a hose burst or leakage.