As Per International Standards

Duratuf Electrical Rubber Mats (IEC 61111:2009)

These electrical insulation mats are manufactured as per the IEC 61111:2009 standard set by the International Electrotechnical Commission and are highly electrical resistant. These mats protect from mortal shocks generated by high voltage equipment.

We recommend thickness from 2mm to 4mm (higher thickness also available) depending on use working voltage resistance with anti-skid textured on both top and bottom surface. We also have available fine-ribbed design in 3mm & 5mm thickness. It is leakage, moisture and water proof guaranteeing long functional life. It is also fire, oil and acid resistant. Manufacturer’s Test Certificate is provided along with the supply.

Duratuf Insulation Mats has been designed for use as electrical safety floor covering in:

>Electrical Substations
>Near HT/LT Control Panels
>In Front of Switchboards
>Around Buss Bars
>Transformer, Generator & Lift Rooms
>For Outdoor/Indoor Onsite Work Work on Live Equipment

>Class *

>Working/Use Voltage *

>Surface Finish *

>Thickness x Width x Length *

>Colour *

>Total Quantity Required *

* Mandatory

Duratuf Switchboard Mats (ASTM-D178)

These electrical rubber insulating mattings are manufactured as per the ASTM D 178 standard set by the American Society for Testing and Materials. These non-conductive rubber mats help protect the workforce from electrical shocks.

The ASTM D 178 standard recommends thickness from 3.2mm to 12.7mm for the mats depending on use/working voltage resistance with anti-skid textured finish on both sides or fine-ribbed top and textured bottom surface. These safety rubber mats (Type-I grade) are leakage, moisture and water proof that guarantee long functional life. Type-II grade offers additional properties such as ozone, flame and oil resistance. Manufacturer’s Test Certificate is provided along with the supply.

Duratuf Insulatng Matting has been designed for use as electrical safety floor covering in:

>Electrical Substations

>Near HT/LT Control Panels

>In Front of Switchboards

>Around Buss Bars

>Transformer, Generator & Lift Rooms

>For Outdoor/Indoor Onsite Work on Live Equipment

Work on Live Equipment

>Class *

>Working/Use Voltage *

>Type *

>Thickness x Width x Length *

>Colour *

>Total Quantity Required *

* Mandatory

Duratuf Electrical Safety Mats (AS/NZS 2978:1995)

These mats are manufactured as per the AS/NZS 2978:1995 standard set by the Joint Standards Australia/New Zealand Committee EL/4. We guarantee standard conformity to ensure protection from electrical shock.

Two classes of mat are available – Class A (Thicker Mats) for general purpose application & Class B (Light Weight) for use on flat indoor surfaces. Both the types are intended to protect personnel where circumstances involve the possibility of contact with conductors or electrical equipment whose voltage does not exceed 650 V a.c. r.m.s. or d.c. Manufacturer’s Test Certificate is provided along with the supply.

Duratuf Insulation Matting has been designed for use as electrical safety floor covering in:

>Electrical Substations
>Near HT/LT Control Panels
>In Front of Switchboards
>Around Buss Bars
>Transformer, Generator & Lift Rooms
>For Outdoor/Indoor Onsite Work on Live Equipment

>Class *

>Working/Use Voltage *

>Thickness x Width x Length *

>Colour *

>Total Quantity Required *

* Mandatory