Duratuf Electrical Insulating Mats
As Per Indian Standards
X-Volt Electrical Insulating Mats (IS 15652:2006)
Electrical Insulating Mats are generally used for covering the floor below the control panels. Our Mats are manufactured as per the latest Indian Standard i.e IS 15652:2006. It is mainly used for the safety of workers while installing and operating electrical equipment because of the possibility of leakage of current.
These are manufactured using elastomer (latex, rubber, and elastomeric compounds that might be natural, synthetic, or a mixture of both) all along with anti-skid aberrations on the top to avoid slippage and smooth lower surface. The manufacturer’s Test Certificate is provided along with the supply.
Safevolt Insulation Mats (IS 15652:2006)
It is generally used for covering the flooring below the control panels for protection from electrical shock. It is manufactured as per the latest Indian Standard i.e. IS 15652:2006 and is BIS & CPRI/ERDA approved. It is suitable for both AC & DC panels.
It is a premium grade electrical safety mat exceeding the requirements of the Indian standard and having a premium dotted anti-skid design. It is ISI marked on every meter. It is aimed at customers seeking high-quality and premium finish products. The manufacturer’s Test Certificate is provided along with the supply.
As Per International Standards
Duratuf Electrical Rubber Mats (IEC 61111:2009)
These electrical insulation mats are manufactured as per the IEC 61111:2009 standard set by the International Electrotechnical Commission and are highly electrical resistant. These mats protect from mortal shocks generated by high voltage equipment.
We recommend thickness from 2mm to 4mm (higher thickness also available) depending on the use of working voltage resistance with anti-skid textured on both top and bottom surfaces. We also have an available fine-ribbed design in 3mm & 5mm thicknesses. It is leakage, moisture, and waterproof guaranteeing long functional life. It is also fire, oil, and acid resistant. The manufacturer’s Test Certificate is provided along with the supply.
Duratuf Switchboard Mats (ASTM-D178)
These electrical rubber insulating mattings are manufactured as per the ASTM D 178 standard set by the American Society for Testing and Materials. These non-conductive rubber mats help protect the workforce from electrical shocks.
The ASTM D 178 standard recommends thickness from 3.2mm to 12.7mm for the mats depending on use/working voltage resistance with an anti-skid textured finish on both sides or fine-ribbed top and textured bottom surface. These safety rubber mats (Type-I grade) are leakage, moisture, and waterproof that guarantee long functional life. Type-II grade offers additional properties such as ozone, flame, and oil resistance. The manufacturer’s Test Certificate is provided along with the supply.
Duratuf Electrical Safety Mats (AS/NZS 2978:1995)
These mats are manufactured as per the AS/NZS 2978:1995 standard set by the Joint Standards Australia/New Zealand Committee EL/4. We guarantee standard conformity to ensure protection from electrical shock.
Two classes of mat are available – Class A (Thicker Mats) for general purpose application & Class B (Light Weight) for use on flat indoor surfaces. Both types are intended to protect personnel where circumstances involve the possibility of contact with conductors or electrical equipment whose voltage does not exceed 650 V a.c. r.m.s. or d.c. The manufacturer’s Test Certificate is provided along with the supply.